The Corona President Jr Splicer (8mm + 16mm) is a film editing accessory made by the James Heddon’s Sons Corporation Photographic Industries Division of Dowagiac, Michigan, United States. It is most commonly found integrated as a component of the Corona Super Editor, an editing station featuring dual hand-crank rewinds, a viewing screen, and an illuminated lamp housing. The integrated splicer block handles 8mm and 16mm film formats to repair and join home movies.
Key Features:
- Dual Format: Equipped with standard alignment pins configured to hold both Regular 8mm and 16mm film formats securely.
- Scraper Component: Features a built-in metal scraping blade used to remove the emulsion layer from the film edge before applying adhesive.
- Splicing Method: Primarily utilizes classic film cement (a chemical solvent) to fuse the film bases together, though it can also be adapted for tape-based repairs.
- Industrial Build: Constructed with heavy metal castings and a sturdy base.
How to Use the Splicer
- Trimming: Place the two overlapping film ends onto the registration pins and use the integrated blade to make a clean, straight cut across the frame line.
- Scraping: Raise one side of the film and gently use the built-in scraper tool to scratch off the dark emulsion layer on the edge, exposing the clear film base underneath.
- Applying Cement: Apply a tiny drop of film cement to the scraped area using a small brush.
- Clamping: Immediately clamp the two film ends together using the spring-loaded metal plates. Hold it tightly for 10–15 seconds to let the solvent weld the layers.
- Clean Up: Wipe away any excess cement and check that the film sprocket holes line up perfectly so it passes through a projector smoothly.
Comments
Post a Comment